|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Power Supply: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
thermal shock test chamber
This product is used to test the change of material under extremely high temperature and extremely low temperature environment that continue alternation in the shortest time, Testing the chemical changes or physical damage of material caused by the thermal expansion and contraction. Testing box divided two parts, one is high-temperature region, another is low-temperature region, the testing sample placed on the moving basket, using unique heat storage and cool storage, the cylinder taking basket moves up and down in the hot and cold region to complete the hot and cold temperature impact testing; applied to test the material, including metal, plastic, rubber, electronics and other materials, it can be used as a basis for improvement of their products.
.
Equipment characteristic
1. Pre-cooling temperature range in low temperature zone: -45ºC ~ 0ºC.
2. High temperature zone preheating temperature range: +50ºC ~ +150ºC.
3. High and low temperature conversion time: 5min.
4. Temperature fluctuation: ±0.5ºC.
5. Temperature uniformity: ≤±2.0ºC.
6. Test holding time: >=15min (adjustable).
7. Energy storage area rising and cooling rate:
Average cooling rate in low temperature zone: (0.7 ~ 1.5) ºC/min.
Average heating rate in high temperature zone: (3.0 ~ 6.0) ºC/min.
8. Test weight: 15 KG (other specifications can be customized).
9. System noise: 68 DB.
10. Power supply: AC3 5W 380V±10%; 50HZ.
11. Use air source (compressed air) : pressure: (5 ~ 7)kg/cm2
12. Power: 18KW.
13. Maximum working current: 35.0A.
14. Weight: 300KG
15. The rate of temperature change is the average rate of air temperature change, rather than the rate of surface or internal temperature change of the product.
16. The performance measured after 20 minutes of stability without test load and without shelf.
17. The temperature sensor is set in the circulation motor outlet.
18. Equipment fault protection: overheat protection circuit breaker, leakage protection, compressor overload protection, control system overload protection, phase sequence
Protection, water shortage protection, high pressure and low pressure protection, over temperature protection, fan overcurrent protection.
| Volume | 100L | 150L | ||
| Controller | Programmable touch screen controller | |||
| Internal size(W*D*H) | 500*500*400mm | 600*500*500mm | ||
| External size(W*D*H) | 1550*1750*1880mm | 1650*1750*1980mm | ||
| Parameters | Shock temp.range | -40ºC~+150ºC | ||
| Heating up temp. | +50ºC~+150ºC | |||
| Cooling down temp. | 0ºC ~ -40ºC | |||
| Temp.accuracy and uniformity | ±0.2ºC / ±2ºC | |||
| temp.shock rate | ≤5min | |||
| External material | Stainless steel | |||
| Internal material | SUS304 stainless steel | |||
| Insulation material | High density glass cotton and PU foamed insulation | |||
| Air duct system | Multi-wing centrifugal circulating fan | |||
| Heater | U type finned seamless stainless steel heater | |||
| Compressor | Tecumseh brand | |||
| Cooling mode | Air-cooled mode | |||
| Sample shelf | 1pcs | |||
| parts | Watching window;50mm testing hole; partition plat | |||
| Protection devices | Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch,super humidity over-temperature protection switch, fuse, failure warning system |
|||
| Power | AC380V 50~60Hz 18KW | |||
Yes, we offer OEM services for customers who want to customize their products with their own branding and design.
4.how do you control your product quality?
We will examine and test every products including their materials, appearance and performance,there are different QC in every processes.
the third party can be also delivered to check the products.
){kind=link}